relive hard disk repair services

Don’t freak out if your HDD hard disc becomes corrupted we can external or internal hard disk repair malaysia because of a file system problem or if it goes RAW. This manual will provide you step-by-step instructions on how to fix a corrupt hard drive without losing data. To do this, you must first determine whether the difficulty accessing the hard drive is due to a logical fault. If so, you can examine and repair your hard drive. You must send your hard disc to the data recovery or repair service centre if it has a physical issue.

The most recent annual survey of hard drive dependability was conducted by cloud backup service provider Backblaze, and it found that the annualised failure rate for contemporary hard drives is around 5%. Thus, if a group of 50 users each uses two hard drives (perhaps one inside a personal computer and one inside a laptop), one of those 50 person will lose all the information saved on the hard drives within a year.

If you store important data on your computer without a sufficient backup, that’s bad news. Not only are you likely to lose access to your files when a hard disc fails, but you might even be unable to start up your computer.

hard disk repair malaysia

How to Work Hard Disk Repair Malaysia with HDD Repair Software

Before you start, you should manually check your power supply and the heat of your fan. Make sure that they are working properly. Only then, follow the following solutions for HDD repair:

1. Run Antivirus

  • #1 Bitdefender.
  • #2 Norton.
  • #3 Kaspersky.
  • #4 ESET.
  • #5 Webroot.
  • #5 Avast.
  • #5 McAfee.
  • #5 Trend Micro.

Connect the hard drive to another Windows PC and use a reliable antivirus to scan the drive. Sometimes, viruses and malware can cause such errors. Therefore, an antivirus scan may repair the corrupted hard drive and make the drive accessible.

2. Check and Repair Hard Disk Error in Windows 10/8/7 

Try a Windows built-in tool first to check and repair hard disk errors. If it works, you can access your data. Here’s how to do it in Windows 10, 8, or 7:

Step 1. Open “This PC/Computer”, right-click the hard disk or partition which you want to check, and click “Properties”.

Step 2. Select “Tools” and click “Check now” under Error-checking.

Step 3. Check Disk Options dialog will show up. Select any one of the options to check and repair the hard disk.

Step 4. Select and check both “Automatically fix file system errors” and “Scan for and attempt recovery of back sectors”, then click “Start”.

How to Repair External Hard Disk Not Detected?

If your external hard drive isn’t recognized, you can take the following different solutions and steps to get the external hard disk error fixed external hard disk repair malaysia.

Way 1 Check IDE / SATA to USB Connection:

  1. Ground Yourself:
    It is important that before you open up any hardware, make sure you ground yourself for obvious reasons that include being shock resistant.
  2. Install the Drive:
    Use an IDE / SATA data cable and a power connector to install the hard drive internally on your system. You can also try connecting the drive externally via USB.
  3. Conclude the observations:
    The above two steps will help you determine whether or not the enclosure was the reason that you were not able to recognize your hard drive in the system. By this reconnecting technique, you will figure out if you need to narrow down the issue further.

If the external hard disk enclosure is not the issue, you need to dig further to find out the culprit by following up on another series of steps.

Way 2 Check the sound the hard drive is making:

Listen up to the sound that your connected hard drive is making. Are you able to hear it? If it is spinning you’ll possibly know the sound.

  • Compare the sound with failing hard drive sounds listed by Data Cent.
  • Try figuring out the possible scenarios which cause the sound you hear.
  • However, if there is no sound made by the hard drive, it is dead in all probability.
  • This damage can be internal, due to the faulty printed circuit board (PCB).

If your drive is spinning but the system doesn’t recognize your hard drive, follow the next series of steps to manually check the settings on your computer.

Way 3 Enter into BIOS:

Press the trigger key that could be [DEL][ESC][F2][F10] or [F12], depending upon your system. Check out the list of the types of devices that are connected with your system. You can fetch this information under the BOOT menu or Advance menu of the system.

hard disk repair near me

On Windows: If you are working on windows, here are the steps to check the devices connected:

  1. Click the key combination [Windows] + [R] to launch “Run”.
  2. Open the Command Prompt by inputting cmd in the field, and then hit Enter.
  3. Type “diskpart” and press Enter to launch the diskpart.exe.
  4. Type list volume in the diskpart menu to see the connected drive.
hard drive repair

Way 4 Fix external hard drive by formatting

You can also directly use the diskpart.exe to repair external hard drive not detected. Here are the steps:

  1. Once the diskpart.exe is launched, type “select disk 0” and press Enter.
  2. Type “clean” and hit Enter. This input will entirely erase all data on the external hard drive.
  3. Input “create partition primary” and also the same, Enter.
  4. Finally, click the “x” icon at the upper right corner.

Notes: 0 means the drive letter of the external hard disk to be repaired. It can be also 1 or 2.

As we can see, to learn how to repair an external hard drive is handy as it helps in avoiding unprecedented circumstances about your data. For the ones keen to repair an external hard drive, we have multiple options, each catering to different issues and users. Therefore, you no longer need to worry if your Seagate or WD external hard drive not recognized.

Part 2 How to Recover Files from External Hard Drive Without Formatting

1. Recover External Hard Drive with HDD Repair

A corrupted external hard drive HDD Repair can always bring about data loss, even if sometimes you repair it successfully. If you lost data on your external hard drive, unfortunately, don’t worry! You still have the chance to get lost data back. To recover files from external hard drive, you can have a try Data Recovery.

This external hard drive recovery software can help you recover data from an external hard drive no matter if it is corrupted, dead, crashed, damaged, or not detected. Before external hard drive data recovery, Recover it also allows you to preview the scanned files to make a selective recovery.

How to Recover Files from External Hard Drive

Instruct you how to recover files from external hard drive without formatting. Just take one minute, and you can get the surefire way to data from hard disk on Windows or Mac.

3. How to Retrieve Data from External Hard Drive

To start external hard drive recovery, you should firstly get Data Recovery free downloaded and installed on your computer. After the installation, connect the external hard drive to your Windows computer and then follow the next steps to regain the lost data from an external hard drive.

Mac users can download the Mac version of Data Recovery and turn to this page: How to Recover Files from External Hard Drive on Mac.

External hard drive

Among all the hard drives which have been shown on the screen, please select the corrupted external hard drive and click the “Start” button to move forward.

Note: Please ensure that the selected external hard drive has been connected and can be recognized by the computer.

hdd bad sector repair tool

Step 2. Scan the external hard drive

Start a quick scan on the undetected external hard drive. If the quick scan can’t help you get the lost data, turn to the “All-around Recovery” mode. It can search for more files for you on the external disk.


Step 3. Recover data from external hard disk Malaysia

Once the scan finishes, you can preview all the found data, select the wanted ones, and click “Recover” to restore the files from the external disk.

Part 3 How to Fix External Hard Drive with Error Messages?

While using your external hard drive, there has been observed an error message, which asks the user to format the hard drive. In these cases, it is recommended not to follow the instructions blindly and do some researches on your own. Some of the error messages are:

Commonly, a user will not able to understand what a RAW file system means, therefore, they may follow the critical step of formatting the data to solve the issue. However, if you understand the requirements of the system, you might solve without the loss of any data. A RAW file system is a file that the Windows cannot recognize. As a result, available drivers could not mount the file system to a drive. Maybe, the filesystem type or location on the disk is corrupted. When the Windows are unable to find these files, it prompts the user to format the data.

Wonder how to recover files from the RAW file system? This page can be your reference: How to Recover Data from RAW SD Card.

This usually happens because many users disconnect their hard drives without choosing the “Safely Remove Hardware?” option. Here is a way to fix this issue without formatting your hard drive external hard disk repair malaysia.

1. Use CMD for external hard disk check

  • Press and hold Windows icon and R keys.
  • Input “cmd” and hit Enter in the pop-up window.
  • Type “chkdsk f: /f ” and hit Enter to begin the scan process.
  • Upon completion, you can usually find the external hard disk errors fixed.

Generally speaking, the external hard drive errors can be repaired using CMD. What you should note is that regarding “chkdsk f: /f “, the first f should be replaced with the drive letter of the external hard drive.

2. Access S.M.A.R.T Data

If there is any physical damage to your hard disk, S.M.A.R.T Data will help you quickly figure out the problems that are being faced. S.M.A.R.T stands for Self-Monitoring, Analysis, and Reporting Technology and is used to alert the impending failure of the drive. This technology gives the user a deadline that they require to save the data.

Functions of S.M.A.R.T:

  • S.M.A.R.T helps the user to retrieve the data from the drive.
  • Save your data and prevents the user from attempting absurd mistakes that make the situations worse.
  • S.M.A.R.T Data also helps in determining whether the damage is physical or logical. In case of physical damage, save the important data at another safe location and replace your hard drive. However, if the damage is logical, you can trust the drive and use Data Recovery to retrieve corrupted files after the repair.

If at any point in time, your hard drive reports that S.M.A.R.T health is not able to access the search or in anyways, FAILED, the primary step one must take is to save the data immediately as the drive is of no longer use.

3. How to Repair External Hard Drive

Follow these steps if you are wondering how to fix the external hard drive. However, if your problem is still not solved, there are chances that the PCB of your external hard drive is damaged. There are ways to replace your hard drive’s PCB, but for your record, these methods are not recommended as they may cause further damage to the device.

Closing Words

Before looking for professional repairs, it is recommended that you repair the external hard drive on your own. And his detailed disk external hard drive repair malaysia tutorial must help you, which is aimed at smoothing the way for you to fix a corrupted external hard drive. Another advice is that you should take good care of the data stored on it during or after external hard drive repair. If unfortunately, you find them lost, please turn to Data Recovery in less than no time so that you can promptly recover data from external hard drive not detected or not working.

Hard Disk Repair Frequently Asked Questions

Read more about HDD repair and hard disk repair Malaysia KL Selangor software.

Can a hard disk be repaired?

There are two types of hard drive errors: logic and physical errors. In most cases, Windows is able to repair a logic error, as it’s almost always related to a software mishap. Formatting the drive will almost always fix this. But, if it’s a physical corruption, it can not be repaired. You need to replace the damaged hard drive with a new one.

How do you fix a corrupted hard drive?

You can use software hard disk repair tool to perform HDD repair:

  1. Free hard driver repair malaysia on your Windows computer. 
  2. Find your hard disk, right-click it, and choose Check File System.
  3. The disk repair tool will check your hard disk and repair HDD error.
  4. hard disk bad sector repair tool
  5. hard disk error repair software

How to repair damaged external hard drive?

How to repair external hard disk without any cost with external hard drive repair malaysia:

  1. Connect your external hard drive to the computer.
  2. Right-click the external hard disk and choose Check File System.
  3. Hard drive repair tool will check and fix hard drive errors that it finds.

External Hard disk repair malaysia software free download full version?

Hard disk health check and repair software free download. Free hard disk repair tool to repair corrupted HDD or external hard drive.

What’s the best hard drive repair services in kuala lumpur (KL)

1. Relive hard disk error checking

2. Free diagnosis hard drive repair center

3. hdd data recovery kuala lumpur

How can I repair my hard disk with bootable hard disk repair tool?

When your hard drive is damaged and your computer can’t boot, how can you repair the damaged hard drive? Download and use the Partition utilities to repair HDD with a bootable flash or DVD.

1. Prepare a storage media, like a USB drive, flash drive, or a CD/DVD disc.

2. Start your computer from the USB bootable drive.

5. Right-click the corrupted hard disk and choose Check File System to repair HDD.